Metal foot designed for firmly anchoring posts with a cross section of 60 × 40 mm to the existing base . It is mainly used when installing fencing on concrete walls, terraces or other solid surfaces where it is not possible to install the post directly into the ground. It allows for precise and stable installation of the post in the desired position.
Construction and dimensions
The plate is made of steel profile with a wall thickness of 1.5 mm and a total height of 195 mm . The base plate with dimensions of 120 × 120 mm and a thickness of 5 mm provides sufficient support for secure anchoring. The dimensional stability ensures that the foot keeps its shape even under load and transfers forces evenly to the substrate.
Anchoring and stability
The base contains four holes with a diameter of 12 mm , which allow for a solid and multi-point attachment. Such a solution increases resistance to deflection and improves the stability of the entire post under wind load or mechanical stress. Proper anchoring is crucial for the long-term functionality of the entire 3D fence .
Surface finish and durability
The steel structure is hot-dip galvanized and supplemented with a colored surface treatment , which increases protection against corrosion and at the same time allows the element to be visually harmonized with the fence . The surface is suitable for long-term outdoor use even when exposed to moisture and temperature changes.
Mounting method
The plate is mounted on a solid base using anchoring elements according to the type of material. The most commonly used are hammer-in screws or chemical anchors with a threaded rod. After fixing the base, a post is inserted into the profile, creating a solid and stable connection ready for further installation of fillings or panels.
Typical use
- installation of fence posts on concrete walls
- anchoring to paving or paved surfaces
- implementation without intervention in the underlying layer
- construction and technical applications
Technical parameters
- Material: steel, hot-dip galvanized + paint
- Color: anthracite (RAL 7016), green (RAL 6005), zinc
- Wall thickness: 1.5 mm
- Height: 195mm
- Base: 120 × 120 × 5 mm
- Anchoring holes: 4 × Ø12 mm
- Designed for profile: 60 × 40 mm
Reviews
There are no reviews yet.